- Vanagon Front Suspension
- >
- Tie Rod End (Outer) – TRW
Tie Rod End (Outer) – TRW
2 required to do both sides of Van.
Professionals recommend these always be replaced in pairs
Sold as a set of 2
Includes:
2 outer tie rod end
2 nuts
Fits:
2WD Vanagon
4WD Syncro
Related Products
Front Sway Bar Link – Early Style
These are direct bolt on replacement parts made from high quality steel.
Sold as a set, which will do both sides of Van
Includes:
2 sway bar link arm
Fits:
4WD Syncro
Don't forget our: Urethane Lower Bushing Kit
… (Includes 4 bushings, 4 washers, 2 nyloc nuts)
Radius Arm Bushing Kit
Fits:
2WD Vanagon
4WD Vanagon (Syncro)
Includes:
2 radius rod rubber bushings (front)
2 radius rod rubber bushings (back)
4 washers
2 stainless sleeves
2 nuts
2 nyloc nuts
FEBI Tie Rod Ends – Pair of 2
2 required to do both sides of Van.
Professionals recommend these always be replaced in pairs
Sold as a set of 2
Includes:
2 outer tie rod end
2 nuts
Fits
2WD Vanagon
4WD Syncro
Front Lower Control Arm Bushing Kit – Urethane
Redesigned new generation Burley Motorsports lower control arm bushing kit features: slotted inner bore to hold grease next to the precision cnc machined 304 stainless steel sleeves, have a nice precision in the arm itself fit , easier to install than OEM or other bushings found on the market.
One kit does both sides of Vanagon
* Shown with optional bolt kit
Includes
4 bushings
2 stainless steel sleeves
1 installation/lubrication instructions
Fits
2WD Vanagon
4WD Syncro
Optional
Bolt kit (2 bolts, 4 washers, 2 locknuts)
Sway Bar Link Upper Bushings (set of two)
OEM-grade sway bar link bushing for the upper end of the link where it slides over the sway bar end.
These are rubber bushings sold in pairs so you can do both sides of the van.
Complete Lower Urethane Bushing Kit
There’s something about the rain falling that really makes us assess how well our vans are handling, and how our tires are wearing.
If you have a shimmy shimmy wiggle wiggle, uneven tire wear, or just worn out bushings – this kit will cover all four corners of the van. The bushings are urethane and while not as soft as the stock rubber, we feel they are a worthwhile compromise because they last longer and the additional stiffness provides better feedback, handling.
Features
– High quality urethane bushings, in stock black color
– Bushings have “flutes” to hold more grease, longer
– Stainless steel sleeves for bushings
– 10.9 Zinc plated hardware (bolt kits)
Includes
– Front lower control arm urethane bushings – 1 sets (4 bushings, 2 sleeves)
– Front lower control arm bolt kits – 2 sets (2 bolts, 4 washers, 2 nuts)
– Rear trailing arm urethane bushings – 1 sets (8 bushings, 4 sleeves)
– Rear trailing arm bolt kits – 4 sets (4 bolts, 8 washers, 4 nuts)
Fits
2WD Vanagon
4WD Syncro
Front Lower Ball Joint Washer
Replacing your ball joints? Is your washer corroded? These are made in house.
Includes
1 lower ball joint washer (2 per van required)
Fits
2WD Vanagon
4WD Vanagon (Syncro)
Complete Sway Bar Bushing Kit
This kit is a complete sway bar bushing kit.
Kit includes:
2 rubber center sway bar mount bushings for 21 mm diameter sway bar.
2 rubber sway bar link bushings for 21 mm sway bar
( these bushings go in the top of the sway bar link )
1 BMS urethane lower sway bar link bush kit
All rubber bushings in this kit are Genuine Febi.
All urethane bushings in this kit are Genuine Burley.
NOTE :
21 mm sway bar is standard diameter sway bar size on most 2wd campers and Syncro models.
Some 2wd models use 19 mm sway bar. We suggest that you measure the diameter of your sway bar to be sure you have a 21 mm bar.
**This kit will not fit if your van has a 19 mm sway bar.